cukup diklik, buku tiba dirumah…
Generating set CUMMINS 500 KVA Open/Silent by ONAN
Spesifications :
Engine : Cummins KTTA19 G4
Alternator : STAMFORD 500 KVA
Authorized : by ONAN.
Generating set VOLVO 450 KVA Open
Spesifications :
Engine : VOLVO TWD 1620G
Alternator : LSA 450 KVA
Control Panel : Engine Start Module, AC Power Indicatr, Volt meter, Hz meter, Ammeter
Authorized : Original from Sweden
Generating set DEUTZ 400 KVA Open
Spesifications :
Engine : DEUTZ BF8M 1015 C
Alternator : LSA 400 KVA
Control Panel : Engine Start Module, AC Power Indicatr, Volt meter, Hz meter, Ammeter, DC Indicator such as Water pump, Oil Pressure, Operating Hours, Fuel Level, Battery Charging
Authorized : by ELFA Generating sets
CP. Agus Santoso HP 0816508244
Specifications : 1. Engine : MITSUBISHI 6D22 (New Brand), 160 HP @1500 rpm, Mechanic Governor
2. Altenator : AVK 125 KVA, New single bearing, Power 125 KVA, 50 Hz, 380 V, 3 Phase, 0,8 PF.
3. Indicator Control Panel : Water pump, Oil Pressure, Fuel Level, AC Voltmeter, Hzmeter, Ammeter, Safety Device
4. Silent Box : By ELFA Generating sets
CP. Agus Santoso HP 0816508244
Specifications :
1. Engine : MITSUBISHI 6D14 (Recondition), 75 HP @1500 rpm, Mechanic Governor
2. Altenator : SPECTECH 60 KVA ( New Brand ), New Single bearing, Power 60 KVA, 50 Hz, 380 V, 3 Phase, 0,8 PF.
3. Indicator Control Panel : Water pump, Oil Pressure, Fuel Level, AC Voltmeter, Hz, meter, Ammeter, Safety Device
4. Silent Box : By ELFA Generating sets
CP. Agus Santoso HP 081 6508244
Specifications :
1. Engine : MITSUBISHI 4D30 (Recondition), 37.5 HP @1500 rpm, Mechanic Governor
2. Altenator : YANAN 30 KVA ( New Brand ), Single bearing, Power 30 KVA, 50 Hz, 380 V, 3 Phase, 0,8 PF.
3. Indicator Control Panel : Water pump, Oil Pressure, Fuel Level, AC Voltmeter, Hz, meter, Ammeter
4. Silent Box : By ELFA Generating sets
CP. Agus Santoso HP. 081 6508244
The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front.
OPERATION
The modules are operated using the front STOP, AUTO and MANUAL push buttons. The DSE5120 also
includes a TEST button. An additional push button on both modules allows the user to scroll through the LCD instrumentation display.
CONFIGURATION
The modules can be configured using the front panel buttons or the DSE810 interface and PC software.
KEY FEATURES
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• Icon based fault diagnostics
• PC configurable
• Front panel programming
• Remote monitoring
• LCD alarm indication
• LED alarm indication
KEY BENEFITS
• In-built engine diagnostics removes the requirement for service equipment
• License free PC software
• Modules help to improve the life cycle of engine starter motors
• On-site module configuration
• User-friendly set-up and button layout
DC SUPPLY
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing the supply was at least 10V before dropout and supply
recovers to 5V
OUTPUTS
START RELAY OUTPUT
16A DC supply at supply voltage
FUEL RELAY OUTPUT
16A DC at supply voltage
AUXILIARY RELAY OUTPUTS
5A DC at supply voltage
CHARGE FAIL/EXCITATION RANGE
0V to 35V
MAXIMUMOPERATING CURRENT
320mA at 12V, 215mA at 24V
MAXIMUMSTANDBY CURRENT
175mA at 12V, 95mA at 24V
ALTERNATOR INPUT RANGE
15V (L-N) to 333V AC (L-N)
absolute maximum
ALTERNATOR INPUT FREQUENCY
50-60 Hz at rated engine speed (Minimum: 15V AC L-N)
MAGNETIC PICK-UP VOLTAGE INPUT RANGE
+/- 0.5V to 70V Peak
MAGNETIC INPUT FREQUENCY
10,000 Hz (max) at rated engine speed
DIMENSIONS
OVERALL
240mm x 172mm
9.4” x 6.8”
PANEL CUT-OUT
220mm x 160mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8mm
0.3”
Price : Call ( 0816508244 )
